| W x D x H |
44" x 311/2" x 40"
|
| Weight |
365 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 2.9 Amps |
| Certifications |
     |
F18WCP
31.5" (80cm) Deep Self-Contained Refrigerated Work Tables
Exterior top is constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front, and 4" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top is insulated with 2" (5.1cm) of high-density insulation.
|
Base
Base has a machine compartment, standard on right, with a condensing unit with condensate evaporator and an electrical junction box installed. Machine compartment has a removable louver for access to condensing unit. Blower coil(s) with expansion valve are located behind the door mullions. |
|
Legs
Unit is mounted on 6.13" (15.6cm) high adjustable stainless steel legs. |
|
Construction
Exterior Back and Bottom are 24-gauge galvanized steel. Exterior ends are finished with 18-gauge galvanized steel. |
|
Doors
Door(s) have a 22-gauge stainless steel exterior front, with thermoformed ABS plastic interior liner, black recessed handle and snap in magnetic gasket which is easily replaceable. Each interior door section has (1) removable epoxy coated wire shelf. |
|
Electrical
Electrical connections are 115 volt, 60 Hertz, single phase. Unit is wired with 8’ (2.4m) cord and plug. |
|
Base Interior
Base Interior is 22-gauge stainless steel back and bottom. Base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) high density foamed in place polyurethane. |
| Environmentally friendly R290 refrigerant |
F18WC44P
F18WC48P
| W x D x H |
48" x 311/2" x 40"
|
| Weight |
390 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 2.9 Amps |
| Certifications |
|
F18WC60P
| W x D x H |
60" x 311/2" x 40"
|
| Weight |
435 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 2.9 Amps |
| Certifications |
|
F18WC68P
| W x D x H |
68" x 311/2" x 40"
|
| Weight |
495 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 2.9 Amps |
| Certifications |
|
F18WC87P
| W x D x H |
87" x 311/2" x 40"
|
| Weight |
535 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 4.8 Amps |
| Certifications |
|
F18WC95P
| W x D x H |
95" x 311/2" x 40"
|
| Weight |
615 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 4.8 Amps |
| Certifications |
|
Cutting BoardCutting board (Sanalite or composite) |
|
DrawersA-(2) 19" in lieu of one doorB-(2) 27" in lieu of one doorC-(2) 32" in lieu of one doorE-(3) 19" in lieu of one doorF-(3) 27" in lieu of one doorG-(3) 32" in lieu of one doorH-(2) 24" in lieu of one doorJ-(3) 24" in lieu of one door |
|
Stainless steel end(s) |
|
Laminate Back |
|
Laminate End |
|
Laminate facing (full front) |
|
Locks |
|
Tray Rack for 18" x 26" pans |
|
BackStainless steel back |
|
CastersCasters |
|
Remote refrigeration (contact factory) |
|
Celsius readout for electronic control |
|
Temp control viewing lens on mechanical housing |
