| W x D x H |
47" x 311/2" x 42"
|
| Weight |
520 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 4.7 Amps |
| Certifications |
    |
F18RCP
31.5" (80cm) Deep Self-Contained Refrigerated Reduced Height Rail
Exterior top is one-piece, 16-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing on front. Top has a mechanically cooled refrigerated raised rail at rear with openings to accommodate 1/6 size pans. Pans and adapter bars are provided by others. Pans are recessed 3" (7.6cm) or 2" (5.1cm) and set on adjustable stainless steel pan supports. Rail interior is 22- gauge stainless steel. Raised rail openings have 20-gauge stainless steel removable lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated cold pan. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C) with pans recessed 3" (7.6cm) at 86° ambient room temperature, meeting NSF7 requirements.
|
Legs
Unit is mounted on 6.13" (15.6cm) high adjustable stainless steel legs. |
|
Construction
Exterior Back and Bottom are 24-gauge galvanized steel. Exterior ends are finished with 18-gauge galvanized steel. |
|
Base Interior
Base Interior has 22-gauge stainless steel back and bottom. Base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) high density foamed in place polyurethane. End of base has a machine compartment, standard on right, with condensing unit installed. |
|
Doors
Door(s) have a 22-gauge stainless steel exterior front, with thermoformed ABS plastic interior liner, black recessed handle and snap in magnetic gasket which is easily replaceable. Each interior door section has (1) removable epoxy coated wire shelf. |
|
Electrical
Electrical connections are 115 volt, 60 Hertz, single phase. Unit is wired with 8’ (2.4m) cord and plug. |
|
Refrigeration system
Refrigeration system uses R290 refrigerant, and will maintain 36°F (2°C) to 40°F (4°C) interior cabinet temperature. |
F18RC47P
F18RC60P
| W x D x H |
60" x 311/2" x 42"
|
| Weight |
560 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 4.7 Amps |
| Certifications |
|
F18RC68P
| W x D x H |
68" x 311/2" x 42"
|
| Weight |
650 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 4.7 Amps |
| Certifications |
|
F18RC72P
| W x D x H |
72" x 311/2" x 42"
|
| Weight |
650 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 6.5 Amps |
| Certifications |
|
F18RC91P
| W x D x H |
91" x 311/2" x 42"
|
| Weight |
750 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 6.5 Amps |
| Certifications |
|
F18RC99P
| W x D x H |
99" x 311/2" x 42"
|
| Weight |
775 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 6.5 Amps |
| Certifications |
|
F18RC114P
| W x D x H |
114" x 311/2" x 42"
|
| Weight |
775 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 6.5 Amps |
| Certifications |
|
Cutting BoardCutting board (Sanalite or composite) |
|
DrawersA-(2) 19" in lieu of one doorB-(2) 27" in lieu of one doorC-(2) 32" in lieu of one doorE-(3) 19" in lieu of one doorF-(3) 27" in lieu of one doorG-(3) 32" in lieu of one doorH-(2) 24" in lieu of one doorJ-(3) 24" in lieu of one door |
|
Stainless steel end(s) |
|
Laminate Back |
|
Laminate End |
|
Laminate facing (full front) |
|
Locks |
|
Tray Rack for 18" x 26" pans |
|
Stainless steel back |
|
Casters |
|
230V/50 cycle electrical*Inclusion of this option will alter the electrical specifications |
|
Available with LiquiTec cooling rail |
|
Available in R404a refrigerant (contact factory) |
|
Remote refrigeration (contact factory) |
|
Celsius readout for electronic control |
|
Temp control viewing lens on mechanical housing |
