| W x D x H |
47" x 311/2" x 433/4"
|
| Weight |
520 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 4.7 |
| Certifications |
   |
F18DCP
31.5" (80cm) Deep Self-Contained Quick Glance Rail
Exterior top is one-piece, 16-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing on front. Top has a mechanically cooled refrigerated raised rail at rear with openings to accommodate 1/6 size pans. Pans and adapter bars are provided by others. Pans are recessed 3" (7.6cm) or 2" (5.1cm) and set on adjustable stainless steel pan supports. Rail interior is 22-gauge stainless steel. Raised rail openings have 20-gauge stainless steel removable lids. Unit is equipped with separate expansion valve, on/off and for refrigerated cold pan. Temperature in top opening maintains 33°F (1°C) to 41°F (5°C), with pans recessed 3" (7.6cm) at 86° ambient room temperature, meeting NSF7 requirements.
|
Electrical Connections
Electrical connections are 115 volts, 60 Hertz, single phase. Unit has a 8' (2.4m) long cord and plug. |
|
Exterior Top
Exterior top is one-piece, 22-gauge stainless steel with integral 2.12” (5.4cm) square nosing on the front. |
|
Exterior back and bottom
Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel. |
| Environmentally friendly R290 refrigerant |
| High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam insulation throughout unit |
| 8’ cord and plug |
|
Legs
Unit is mounted on 6.13” (16cm) high adjustable stainless steel legs. |
| 16-gauge stainless steel top construction |
| Unfinished ends |
| Interior sub-top is made of durable stainless steel |
| 2BF stainless steel refrigerated base interior back and bottom |
| Refrigerated base fronts are made of .095” thick ABS plastic backed by rigid polyurethane water blown injection molded frames (NO WOOD) |
| Exterior drawer fronts are stainless steel with ABS plastic liner |
| Snap-in dart style vinyl magnetic gasket |
| Recessed black plastic handle held in with a positive lock system |
| 14-gauge leg rails that run the entire length |
| 6.12” adjustable stainless steel legs and bullet feet |
| Quick raised rail maintains NSF7 required 33˚ to 41˚ with pans recessed .88” in front |
| Rail has a on/off switch |
| Interior base cabinet is cooled with mullion style evaporator blower coils (coated) mounted between each door/drawer section for very even air and temperature control |
| Refrigerator base interior maintains 36° to 40° at 100º ambient room temperature |
| Pans and adapter bars by others |
|
Base
Base Interior is 22-gauge stainless steel back and bottom. Base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5” (3.8cm) high density foamed in place polyurethane. |
|
Door(s)
Door(s) have a 22-gauge stainless steel exterior front, with thermoformed ABS plastic interior liner, black recessed handle and snap in magnetic gasket which is easily replaceable. Each interior door section has (1) removable epoxy coated wire shelf. |
|
Refrigeration system components
Refrigeration System Components are HFC-404A. Base has a blower coil assembly with expansion valve located behind door mullion. Base is equipped with independently controlled thermostat and solenoid valve. On/off switch for unit is located behind the hinged panel. |
F18DC47P
F18DC60P
| W x D x H |
60" x 311/2" x 433/4"
|
| Weight |
560 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 4.7 Amps |
F18DC68P
| W x D x H |
68" x 311/2" x 433/4"
|
| Weight |
650 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 4.7 Amps |
F18DC72P
| W x D x H |
72" x 311/2" x 433/4"
|
| Weight |
650 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 6.5 Amps |
F18DC91P
| W x D x H |
91" x 311/2" x 433/4"
|
| Weight |
750 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 6.5 Amps |
F18DC114P
| W x D x H |
114" x 311/2" x 433/4"
|
| Weight |
775 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 6.5 Amps |
F18DC99P
| W x D x H |
99" x 311/2" x 433/4"
|
| Weight |
775 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 6.5 Amps |
Cutting BoardCutting board (Sanalite or composite) |
|
DrawersA-(2) 19" in lieu of one doorB-(2) 27" in lieu of one doorC-(2) 32" in lieu of one doorE-(3) 19" in lieu of one doorF-(3) 27" in lieu of one doorG-(3) 32" in lieu of one doorH-(2) 24" in lieu of one doorJ-(3) 24" in lieu of one door |
|
Stainless steel end(s) |
|
Laminate Back |
|
Laminate End |
|
Laminate facing (full front) |
|
Locks |
|
Tray Rack for 18" x 26" pans |
|
Stainless steel back |
|
CastersCasters |
|
Cold pan drain |
|
230V/50 cycle electrical*Inclusion of this option will alter the electrical specifications |
|
Available with LiquiTec cooling rail |
|
Available in R404a refrigerant (contact factory) |
|
Remote refrigeration (contact factory) |
|
Celsius readout for electronic control |
|
Temp control viewing lens on mechanical housing |
