| W x D x H |
311/4" x 265/8" x 265/8"
|
| Weight |
165 lb
|
| Power Output | 0.3 Horsepower |
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 4.8 Amps |
| Certifications |
   |
N8100-FAP
Drop-In Self-Contained Forced Air Refrigerated Cold Pans
|
Air Curtain Technology
Air Curtain assembly is removable without the use of tools. |
|
Electrical System
Electrical system is 115/60c/1ph with NEMA 5-15 plug on the N8131-FA, N8144-FA and N8157-FA models. The N8169-FA and N8182-FA models come with a NEMA 5-20 plug. |
|
Exterior
Top is one piece stainless steel. Sides are wrapped with refrigeration lines. Sides and bottom are fully insulated with high density environmently firendly closed-cell polyurethane. Exterior housing is galvanized steel. |
|
Interior
Interior liner is stainless steel and is creased to a 1.00" (2.5cm) diameter drain. 4 pan models and larger have two drains. A stainless steel bracket, flush wiht the top, to accomodate 12" x 20" (30cm x 51cm) pans 4" (10cm) or 6" (15cm) deep supplied by others. Product temperatures of 33°F (1°C) to 41°F (5°C) are maintained at 86°F (29°C) ambient room temperature, meeting NSF 7 requirements. Adapter bars for 12" x 20" (30cm x 51cm) pans are standard. |
|
Stainless Steel Louver
A stainless steel louver is provided for field installation on the front of the cabinet, 4" below top of counter; cutout dimension for each is 12" x 23.5" (30.5cm x 59.7cm). A second opening 11" x 22" (28cm x 56cm) at the rear of the cabinet should be provided at installation to allow for proper air circulation. |
|
Refrigeration System
Refrigeration system uses R290 refrigerant. Condensing unit is suspended below the cold pan on a 16-gauge steel frame and uses R290 refrigerant. Temperature controlled by a low pressure control with seperate ON/OFF switch and defrost timer. Unit is supplied with expansion valve. Evaporator coil cools pans by air flowing over and under pans. |
N8131-FAP
N8144-FAP
| W x D x H |
44" x 265/8" x 265/8"
|
| Weight |
175 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 4.8 Amps |
| Certifications |
|
N8157-FAP
| W x D x H |
563/4" x 265/8" x 265/8"
|
| Weight |
225 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 8.9 Amps |
| Certifications |
|
N8169-FAP
| W x D x H |
691/2" x 265/8" x 285/8"
|
| Weight |
235 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 8.9 Amps |
| Certifications |
|
N8182-FAP
| W x D x H |
821/4" x 265/8" x 285/8"
|
| Weight |
255 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 8.9 Amps |
| Certifications |
|
Custom sizes and styles |
|
Single or double service flip-up sneezeguards |
|
Relocate compressor |
