| W x D x H |
48" x 311/2" x 42"
|
| Weight |
520 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 7 Amps |
| Certifications |
![]() ![]() ![]() ![]() |
18600PTLP
Self-contained Refrigerated Pizza Prep Table with Flush Mount LiquiTec® Raised Rail
|
Exterior Top
Constructed of one-piece 18-gauge stainless steel, with integral 2.12" (5.4cm) high square nosing at the front. Top has two mechanically cooled LiquiTec® refrigerated raised rails at the rear with openings to accommodate pans (provided by others). Rail interiors are 22-gauge stainless steel. Raised rail openings have 18-gauge stainless steel hinged removable lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated rails. Temperature in top openings maintains 33°F (1°C) to 41°F (5°C) with pans flush mounted at 86°F (29.7°C) ambient room temperature, meeting NSF 7 requirements. |
|
Base Interior
Stainless steel back and bottom. Base interior sides and door frames are thermoformed ABS plastic. Each interior door section has (1) 25" (63.5cm) deep removable epoxy coated wire shelf. Base is insulated with 2" (5.1cm) high density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) foamed in place polyurethane. End of base has a machine compartment with condensing units installed. |
|
Door(s)
22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner. |
|
Refrigeration System
R290 refrigerant. Cabinet has (1) blower coil assembly with expansion valve on 48" and 72" models. Refrigerated base maintains temperature of 36°F (2°C) to 40°F (4°C). On/off switches for rail and base are located behind the louvered panel. A 2" diameter hole is on the louver for easy access to rail on/off switch |
|
Electrical Connections
115 volt, 60 Hertz, single phase. Unit is wired with 3-wire, grounded, maximum 8' (2.4m) cord and plug. |
|
Adapter
Pans and adapter bars by others |
|
Foam
High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam throughout unit |
| Dart style quick change gaskets |
|
Covers
Stainless steel removable hinged covers |
|
Switch
On/off switch and rail on/off is located behind the louver |
|
Louver
Front louver is hinged for access to condensing unit and allow adequate air flow back of the unit |
|
Cord
8' long electrical cord |
|
Construction
Top is constructed of 18-gauge stainless steel, ends are 22-gauge stainless steel. |
|
Mechanically Cooled
Rail is mechanically cooled utilizing LiquiTec technology with die stamped 12"x20" openings |
|
Flush Mount
Flush mount NSF-7 certified pans |
|
Refrigerant
Environmentally friendly HFC-404A refrigerant |
|
Cutting Board
20" cutting board is standard |
|
Exterior Back, Bottom and Ends
24-gauge galvanized steel back and bottom. Exterior ends are finished with 22-gauge stainless steel. |
|
Casters
Equipment is mounted on 5" (12.7cm) diameter casters; overall height of casters is 6.13" (15.6cm). |
|
Raised rail sized for 12”x20” pan openings
48" prep table sized with (2) 12" x 20" pan openings 72" prep table sized with (3) 12" x 20" pan openings 99" prep table sized with (4) 12" x 20" pan openings |
| Top is constructed of 18 gauge S/S |
18648PTLP
18672PTLP
| W x D x H |
72" x 311/2" x 42"
|
| Weight |
635 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 14 Amps |
| Certifications |
![]() ![]() ![]() ![]() |
18699PTLP
| W x D x H |
99" x 311/2" x 42"
|
| Weight |
805 lb
|
| Power Input Type | Electric |
| Primary Power Input | 115-120 V x 60 Hz x 1 PH |
| Energy Use | 14 Amps |
| Certifications |
![]() ![]() ![]() ![]() |
Cheese grates with removable catch pans |
|
Cutting Board (1/2" thick x 20" deep)Available in poly or composite |
|
Laminate Back |
|
Laminate End |
|
Laminate facing (full front) |
|
LockPer drawer(s) or door(s) |
|
Overshelf18" deep single tier stainless steel overshelf |
|
Tray racksAvailable on 24", 27" and 32" doors only |
|
Stainless Steel Back |
|
6" legs |
|
Drawers19", 27" or 32" wide refrigerated drawers (2) high, holds 6" deep pans19", 27" or 32" wide refrigerated drawers (3) high, holds 4" deep pans |
|
Additional Shelf (specify door size) |
|
Celsius readout for electronic control |






